Product details of Nano V3.0 CH340 with Cable

Arduino Nanois a small, complete board
It based on theATmega328
It can be powered via the Mini-B USB connection

The Arduino Nanois a small, complete, and breadboard-friendly board based on theATmega328(Arduino Nano 3. x) orATmega168(Arduino Nano 2. x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

Power:

The Arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Memory:

TheATmega168has 16 KB of flash memory for storing code (of which 2 KB is used for the bootloader); theATmega328has 32 KB, (also with 2 KB used for the bootloader). TheATmega168has 1 KB of SRAM, and 512 bytes of EEPROM, (which can be read and written with theEEPROM library); theATmega328has 2 KB of SRAM, and 1 KB of EEPROM.

Communication:

The Arduino has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. TheATmega168andATmega328provide UART TTL (5V) serial communication, which is available on digital pins 0 (RX) and 1 (TX). An FTDIFT232RLon the board channels this serial communication over USB and theFTDI drivers(included with the Arduino software) provide a virtual com port to software on the computer. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TXLEDson the board will flash when data is being transmitted via the FTDI chip and USB connection to the computer (but not for serial communication on pins 0 and 1).

Specifications:

Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 12 MHz

Specifications of Nano V3.0 CH340 with Cable

Temperature Data Logger | in pakistan | PDF USB Recorder, RC-5+

Ice cream machine 11 flavours,Double pan tawa ice cream,Slush machines

Nano V3.0 CH340 with Cable