1/ 1
Details
TypePrimers
Description
ThinkDiag2 Has 15+ Poular Maintenance Reset Function
Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change.
TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
ETS Learning: Initializes the throttle actuator to restore the "learning" values stored on the ECU to their default state.
D-P-F regeneration: Generally, D-P-F regeneration matching is required when the exhaust back pressure sensor is replaced, the particulate trap is removed or replaced, the fuel additive nozzle is removed or replaced, the catalytic oxidizer is removed or replaced, the DPF regeneration fault light is illuminated and matched after repair, and the D-P-F regeneration control module is repaired and replaced, mainly to remove the trap performance by using combustion oxidation on a regular basis Always maintain the best stability.
Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
E-G-R Adaption: This function can be used for self-learning after E-G-R (Exhaust Gas Recirculation) valve cleaning or replacement
Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
Headlight Matching
Your safety matters to us!
- Only meet in public / crowded places such as metro stations and malls.
- Never go alone to meet a buyer / seller, always take someone with you.
- Check and inspect the product properly before purchasing it.
- Never pay / transfer any money in advance before inspecting the product.
Ad ID: 1103570783
Find amazing deals on the go.
Download OLX app now!
