Description
Servo motor NEMA23 / 57 JMC integrated servo IHSV(View phone number)T-33 motor driver + motor integrated 100W 0.29NM DC36V
Product Introductions
iHSV57-XX Integrated AC Servo Driving Motor is perfectly integrated AC servo drive into servo motor,
adopts vector control in DSP chip, features in low cost, full closed loop, all digital, low heat, small vibration,
and high response, as well as includes three adjustable feedback loop control modes (postition loop, speed loop,
and current loop).
The products are using CANopen and Modbus-RTU protocol, integrate AC servo motor which integrates
advanced motor control algorithm, RS485 bus and CAN bus communication control technology.
This motor integrates CiA301 standard (CANopen communication protocol), Modbus-RTU
communication protocol and CiA402 motion control protocol, compared with the traditional servo integrated
motor with lower cost and more convenient installation, but also can effectively restrain the motor temperature
rise, significantly to reduce the vibration of the motor and the wiring complexity of equipment.
The drive is compatible with the traditional stepping motor, convenient for customers to upgrade. These
series integrate bus communication control technology, simple wiring, no losing step, lower heat, high speed,
big torque, low cost. It is a cost-effective motion control product.
Technical Feature
Current Loop Bandwidth: (3dB) 2KHz (Typical)
Speed Loop Bandwidth: 500Hz (Typical)
Position Loop Bandwidth: 200Hz (Typical)
Download parameters via RS232C from PC or Text Display.
Support standard RS-485 and CAN bus
Support standard Modbus-RTU protocol which can switch with CANopen protocol
Support standard CiA402 motion control protocol
Three control modes with Position Mode, Velocity Mode, Torque Mode and Homing Mode
Built-in CW, CCW, SW IO input signal with 5V or 24V for the limit switch and homing
A BREAK and PEND signal output signal
RJ45 standard network connection, the slave through the twisted pair cable can be connected
The maximum transmission frequency is 1Mbps, and the maximum transmission distance is up to 1KM
Electro-rheology control technology, high efficiency
User-defined subdivisions
Compatible 1000 and 2500 pulses encoders
No adjustment in general application
Overcurrent, I2T, Over-voltage, Undervoltage, Overheat, Overspeed, Overerror Protections.