How to Use / Installation Guide (With Wiring Details)

Wiring Connection Overview:

Main Unit: Connect wires from the main unit to your car’s electrical system according to the color-coded wiring:
Blue, Green, Pink, Blue/White, Green/White, Pink/White: Connect to the Central Door Lock Control Lines.
Yellow (Window Output) & Gray: Connect to the Direction Indicator Lights to flash when locking/unlocking.
Red: Connect to +12V Battery power supply.
Black: Connect to Ground (-).
Pink: Connect to Trunk Output (+), if your system supports trunk release.
Orange & White: Connect to the Key On input (positive when ignition key is turned).
Break Lamp & Break Switch: Connect the brake lamp and switch wiring as shown for safety or alarm trigger.

Central Lock Installation Options:

FIG 1: For cars with central lock and a lock motor on the driver’s door.
FIG 2: For cars with central lock but no motor on driver’s side door; motor and rod located elsewhere.
FIG 3: For cars with central lock controlled by a switch on the driver’s side.
FIG 4: For cars with air compressor controlled central locks (e. g. , Audi, VW, Mercedes).

Each figure shows wiring to the central lock motor or switch, connecting to the original central controller and car alarm system. Use the correct configuration based on your vehicle’s setup.

Micodus G20 GPS Tracker + Multi-Network SIM (PTA Approved)

PLC Car Keyless Entry System for Toyota Grande - Remote Style Key

Car Keyless Entry System -Toyota Grande Remote style key-