A damping material (to stop vibration) and an acoustic foam (to absorb sound). A 3mm version would likely have a thin layer of butyl damping material backed by a slightly thicker layer of acoustic foam.

How it works: A two-part process

This combination sheet works in two stages to maximize sound control in a vehicle.

Stage 1: Damping vibrations
A butyl rubber layer with an aluminum foil facing is applied directly to the metal panels of the vehicle.
This adds mass and density to the metal, which dampens vibrations and prevents rattling.
This is highly effective against low-frequency road, tire, and engine noise that travels through the vehicle’s metal structure.
Stage 2: Absorbing airborne noise
A layer of sound-absorbing foam is fused to the damping sheet.
The foam works like a sponge, absorbing airborne sound waves that have entered the cabin from outside or are reflecting off interior surfaces.
This reduces echo, reverberation, and high-frequency noise, creating a clearer audio experience.

Benefits of car soundproofing

Comprehensive noise reduction: By addressing both structural vibrations and airborne sound, a foam damping sheet offers more complete soundproofing than a standard damping mat alone.
Improved audio quality: This dual-action material reduces rattling and absorbs echoes, allowing car speakers to sound clearer and sharper.
Thermal insulation: In addition to sound control, the foam and butyl layers provide thermal insulation, helping to keep the car’s interior warmer in the winter and cooler in the summer.
Space efficiency: A 3mm composite sheet provides two layers of sound treatment in a single, space-saving product, ideal for the tight confines of a vehicle interior.

Common installation locations

Acoustic foam damping sheets are installed on a vehicle’s interior panels after the upholstery has been removed. Key areas include:

Doors: To reduce wind noise and improve speaker performance.
Floorboards: To block the road and exhaust noise from entering the cabin.
Roof: To reduce noise from rain and turbulence.
Trunk and wheel wells: To minimize noise from tires and road friction.

Installation method

Preparation: Remove the interior trim and clean the metal surface with a degreaser.
Cut and apply: Trim the sheets to size using a utility knife, then peel off the adhesive backing.
Pressure: Apply the sheet firmly to the surface, using a roller to remove air bubbles and ensure a strong bond.
Cover: Reinstall the vehicle’s interior panels.

Acoustic Foam Damping Sheet 3mm Soundproofing for All Cars